• Driver Output Circuits
  -396 segment outputs / 132 common outputs
• Applicable Duty Ratios
  -Various partial display
  -Partial window moving & data scrolling
• Gray-Scale Display
  -4FRC & 31 PWM function circuit to display
  -64 gray-scale display.
• On-chip Display Data RAM
  -Capacity: 132 x 132 x 16 =278,784bits
  -4K colors (RGB)=(444) mode
  -65K colors (RGB)=(565) mode
  -Truncated 262K colors (RGB)=(666) mode
  -Truncated 16M colors (RGB)=(888) mode
• Microprocessor Interface
  -8/16-bit parallel bi-directional interface with 6800-series or 8080-series
  -4-line serial interface (4-line-SIF)
  -3-line serial interface (3-line-SIF)
• On-chip Low Power Analog Circuit
  -On-chip oscillator circuit
  -Voltage converter (x2, x3, x4, x5, x6, x7, x8)
  -Voltage regulator (temperature gradient -0.15%/C)
  -On-chip electronic contrast control function (406 steps)
  -Voltage follower (LCD bias: 1/5 to 1/12)
• Operating Voltage Range
  -Supply voltage (VDD, VDD1): 1.8 to 3.3V
  (VDD2, VDD3, VDD4, VDD5): 2.4 to 3.3V
  -LCD driving voltage (VOP = V0 - VSS): 3.76 to 18.0 V
  -The suggested value of V0 is 12~15 V under bias =1/11 or 1/12
• LCD Driving Voltage (EEPROM)
  -To store contrast adjustment value for better display
  -To store adjustment value for best crosstalk performance
  
• EEPROM Adjustment Voltage
  -When writing value to EEPROM, VDD2~VDD5 must follow as:
  When Booster x6: VDD2~VDD5 =3.3V
  When Booster x7: VDD2~VDD5 =2.8V~3.0V
  and Booster:ON, Regulator: OFF, Follower: OFF, Display OFF (refer EEPROM flow, page.43 , page.104)
• Package Type
  -Application for COG

Downloads

File	Size	Version	Creation Date
Datasheet	1350K	V1.4	2006/09/07