ST7625
65K Color Dot Matrix LCD Controller/Driver
Product Description
The ST7625 is a driver & controller LSI for 65K color graphic dot-matrix liquid crystal display systems. It generates 306
Segment and 96 Common driver circuits. This chip is connected directly to a microprocessor, accepts Serial Peripheral
Interface (SPI) or 8-bit/16-bit parallel display data and stores in an on-chip display data RAM. It performs display data RAM
read/write operation with no external operating clock to minimize power consumption. In addition, because it contains
power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.
Features - Driver Output Circuits
- 306 Segment Outputs / 96 Common Outputs
- Applicable Duty Ratios
- Various Partial Display
- Partial Window Moving & Data Scrolling
- Gray-Scale Display
- 4FRC & 31 PWM function circuit to display
- 64 gray-scale display
- Support 8 color mode (Idle mode)
- On-chip Display Data RAM
- Capacity: 102 x 96 x 16 =156,672 bits
- Color support by Interface
- 256 color mode, (RGB)=(332) mode
- 4K color mode, (RGB)=(444) mode
- 65K color mode, (RGB)=(565) mode
- Truncated 262K color mode, (RGB)=(666) mode
- Truncated 16M color mode, (RGB)=(888) mode
- Microprocessor Interface
- 8/16-bit parallel bi-directional interface with 6800-series or 8080-series
- 4-line serial interface
- 3-line (9-bits) serial interface
- On-chip Low Power Analog Circuit
- On-chip Oscillator Circuit
- On-chip Voltage Converter (x2, x3, x4, x5, x6, x7, X8) with internal booster capacitors.
- Extremely Few Outsider Components. (Required outsider components: Three Capacitors)
- On-chip Voltage Regulator
- On-chip Electronic Contrast Control Function
- Voltage Follower (LCD bias: 1/5~1/12)
- Operating Voltage Range
- Supply Digital Voltage (VDD, VDD1): 1.65 to 3.0V
- Supply Analog Voltage (VDD2, VDD3, VDD4, VDD5): 2.4 to 3.3V
- LCD Driving Voltage (VOP = V0 - VSS): Max to 18V
- LCD Driving Voltage (OTP)
- Contrast Adjustment Value is stored in the Built-In
- OTP-ROM for better display quality.
- LCD Driving setting suggestion
- VOP = 11V, BIAS=1/9. (VDD=2.8V)
- Package Type
- Application for COG
Downloads
|
![](http://www.sitronix.com.tw/images/dot.gif") |