ST7558
65 x 102 Dot Matrix LCD Controller/Driver
Product Description
The ST7558 is a driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 102 segment
and 65 common with 1 ICOM driver circuits. This chip is connected directly to a microprocessor, accepts 4-line serial
interface (SPI), I2C interface or 8-bit parallel interface, display data can stores in an on-chip display data RAM of 65 x
102 bits. It performs display data RAM read/write operation with no external operating clock to minimize power
consumption. In addition, because it contains power supply circuits to drive liquid crystal, it is possible to make a display
system with the fewest components.
Features - Driver Output Circuits
102 segment outputs / 65 common outputs
- On-chip Display Data ram
- Capacity: 65X102=6630 bits
- Microprocessor Interface
- 8-bit parallel bi-directional interface with 6800-series or 8080-series
- 4-line SPI (serial peripheral interface) available (only write operation)
- I2C (Inter-Integrated Circuit) Interface
- On-chip Low Power Analog Circuit
- Generation of LCD supply voltage (externally Vout voltage supply is possible)
- Generation of intermediate LCD bias voltages
- Oscillator requires no external components (external clock also possible)
- Voltage converter (x2, x3, x4, x5)
- Voltage regulator (temperature gradient -0.05%/¢XC)
- Voltage follower
- On-chip electronic contrast control function (128 steps)
- External RESB (reset) pin
- Logic supply voltage range VDD -VSS
- 1.7 to 3.3V
- Temperature range: -40 to +85 degree
Downloads
|
![](http://www.sitronix.com.tw/images/dot.gif") |